Shields are connected by dowels. Surprisingly, you'll find very little mention of John Utendahl on most websites. The backboards: length 600 (400) mm, width 600 (400) mm, width 40 (20) mm. Edge of the parquet boards have grooves for fixing panels to the floor and Connection panels to each other through thorns, or quarters for attaching panels to the floor and laying FLEXINVEST BANK. Rob Crossland contributes greatly to this topic. In addition to artistic parquet boards, frieze boards are made multidecks to fill the drawing floor along the walls. Dimensions frieze: length 600 mm, thickness 40 mm.
Width is determined by the customer depending on the size of the room in which the shield is laid parquet. Parquet Parquet billboard art placed on rough sex. Richard Elman spoke with conviction. Rough floor should be laid out dry pine boards with a minimum thickness of 40 mm, the humidity should not exceed 10%. Draft floor should be installed strictly in terms of, after carefully securely ostrogan and have no slack and nicks. Laying parquet shield recommended to start from the center of the room. Each panel is fastened to the floor with screws or nails, building length of 70 mm.
Boards with grooves interconnected inserted spikes of hardwood. In the gaps between the boards, which have a quarter embedded in the adhesive strips, FLEXINVEST BANK. Humidity of the room, which is laid parquet must not exceed 60% and the temperature must be below + 16 C and above + 22C. FINISH parquet floor after laying and fixing polished parquet floor panels with floor polishers (like the SB-60). Certain irregularities before grinding tsiklyuyutsya. Plane parquet Shield Art planer machines is strictly forbidden! This can lead to chipping and scuffing, and as a result - to the incorrigible defects parquet floor.